Product overview

TS-CM750 mesoporous thermal insulation felt is a high-performance industrial thermal insulation material based on nano-mesoporous technology. It adopts advanced mesoporous structure design to effectively block the three heat transfer modes of thermal conduction, convection and radiation through nano-scale pores, achieving extremely low thermal conductivity. The thermal conductivity of the product under hot surface conditions of 150°C is only 0.028W/(m·k), which is far superior to traditional insulation materials and is an ideal choice for industrial pipelines and high-temperature equipment insulation.

Core advantages

• Ultra low thermal conductivity— The thermal conductivity of the hot surface is ≤0.028W/(m·k) at 150°C and ≤0.050W/(m·k) at 300°C. The thermal insulation efficiency is 30%-50% higher than that of traditional materials.
• High temperature resistance— The maximum operating temperature reaches 650°C, meeting the needs of most industrial thermal insulation conditions
• Overall hydrophobic— Hydrophobicity ≥98%, effectively preventing the degradation of thermal insulation performance caused by moisture penetration and extending service life
• Class A1 non-combustible— Reach the country’s highest fire protection level to ensure the safety of industrial sites
• Lightweight and efficient— Density is only 180±20% Kg/m³, thinner and lighter with the same thermal insulation effect, reducing the load on the supporting structure
• Convenient construction— The coil specification is 1×20m. It can be flexibly cut and covered according to the diameter of the pipe, and the on-site construction efficiency is high.

Applicable scenarios

TS-CM750 is widely used in the following industrial fields:

• Heat network long-distance pipeline insulation
• Thermal oil pipeline insulation
• Nuclear power plant equipment and pipeline insulation
• Petrochemical plant pipelines and reaction equipment
• Industrial kiln exterior wall insulation
• Thermal power plant steam pipe insulation

Specifications

Why mesoporous insulation felt?

Compared with traditional insulation materials such as aluminum silicate fiber felt and rock wool, TS-CM750 mesoporous insulation felt can reduce the thickness of the insulation layer by 30% -50% under the same insulation effect by virtue of its nanometer mesoporous structure, which significantly reduces the amount of material used and the construction cost. At the same time, its excellent hydrophobic performance and A1 fire rating give it an irreplaceable advantage in humid environments and high safety requirements.